How to make moon rock or BHO crumble step by step

Moon Rock and BHO Crumble are two highly potent cannabis concentrates with an incredible texture. Although there are many recipes on the internet, they often seem complicated or unclear. If you want to make your own Moon Rock or BHO Crumble, it is much easier than it looks if you have the right tools and follow these simple steps that we explain below.

How to make Moon Rock and BHO Crumble?

Both Moon Rock and BHO Crumble are marijuana concentrates that stand out for their potency. However, there are certain differences between the two concentrates:

[ppgbo products=”6518,8290″ language=”en”]

 What is Crumble?

Crumble is a type of cannabis concentrate characterized by its brittle, sandy texture, similar to dry powder or crumbs. It is one of the most popular concentrates due to its high potency and versatility in use, especially for smokers looking for a more intense experience. Its name “crumble” comes precisely from its ability to crumble easily into small pieces.

 Moonrock vs. BHO Crumble

But, what is Moon Rock? Moon Rock, on the other hand, is a flower dipped in cannabis oil and coated in kief. The differences that can be https://www.growbarato.net/blog/wp-content/uploads/2021/09/como-hacer-moon-rock-crumble-bho-1920.jpgfound between these two types include: 

Required materials

Before starting, make sure you have the following materials on hand. Without them, you will not be able to get a good result:

• Roller Xtractor tube or similar
• Refined gas (Colibri or Clipper)
• Pyrex tray
• Pot with hot water
• Ceramic hob
• Infrared thermometer
• Dabber (tool for handling concentrates)
• Scraping blades
• Silicone mat (small or large)
• Vacuum pump
• Vacuum chamber
  

Steps to make Moon Rock or BHO Crumble

If you want to achieve a quality extraction, you must follow these steps:

1. Prepare the plant material

Start by filling the Roller Xtractor tube with cannabis flowers. You can use plant trimmings or fresh or dried buds, always making sure to pack them well so the gas doesn’t get stuck. Before closing the tube, blow lightly to check that air passes through easily.

2. Freeze the material

Place the tube with the marijuana and the gas bottles in the freezer for 24 hours. This is key to maintaining the terpenes and maximizing the quality of the extraction.

3. Perform the extraction

Take the tube out of the freezer and place the Pyrex tray underneath. Fill the Roller Xtractor with gas over the tray outdoors, making sure to do it in a well-ventilated area. You will have to let the gas evaporate, leaving only the paste at the bottom.

[ppgbo product=”1793″ language=”en”]

4. Purge the gas

When the gas has evaporated and only the paste remains, it is time to heat the mixture. Place the Pyrex tray over the pot with hot water (no more than 40°C) and make sure the infrared thermometer does not mark more than that temperature to avoid damaging the terpenes.

5. Drying and purging

With the infrared thermometer, check that it does not exceed 40°C. If the temperature rises, remove the tray from the heat and, once it has cooled down a bit, put it back to heat. This process helps the bubbles to be released and purge the remaining gas.

6. Scrape and mix

When the concentrate starts to take on a thicker texture, scrape the bottom of the tray with the dabber. You will have to do this in up-and-down and diagonal movements to ensure the material is well mixed. As you do this, you will see the mixture change color, becoming more opaque and golden in tone.

7. Let it rest and dry

This process can take a few hours. When you see that the mixture has become thicker and opaque, it will be ready for the next step. You will have to scrape with the blades and place all the concentrate on the silicone mat.

8. Desiccation and vacuum

To ensure the concentrate dries completely, place it in a vacuum chamber and connect the vacuum pump. It is not necessary to cut the vacuum, but you can pause it every 15 minutes to check the progress. The mixture must dry completely, which can take between 1 and 2 days.

9. Verification of drying

When it is dry, you will be able to see that the concentrate has changed color. If you touch it and it is not sticky, it is ready. You should make sure to take a photo of the process to compare the before and after.

Once dry, remove the concentrate from the vacuum chamber and let the air in little by little. Your Moon Rock or BHO Crumble is now ready to enjoy!

Tips for preparing BHO Crumble or Moon Rock

To achieve the best possible result, you will have to keep certain tips in mind, such as the following:

• Patience: this process can take time, but if you follow all the steps correctly, you will get a quality concentrate.
• Quality of material: it is recommended to always choose high-quality flowers to get the best possible result. The quality of the extraction will depend largely on the quality of the plant material used.
• Safety: remember that when working with gas and heat, you must always do it in a well-ventilated place and take the necessary precautions to avoid accidents.

By following these steps, you will be able to make Moon Rock or BHO Crumble like a professional. There are no secrets or mysterious tricks, just good material and patience!