Personalized Attention +44 151 947 0713
SHIPPING TO ALL
9/10 Rating
SALE TO MINORS PROHIBITED
Open your shop
Stores
Iniciar sesión
0
Favorites
90° Elbow Connector for 25mm
€3.25
4.80/5
(5 Ratings)
These 90° Elbow connectors are perfect for putting bends into your watering system without needing to bend your piping.
Description
90° Elbow Connector to Create Bends in the Irrigation System
When setting up your automatic watering systems you’ll probably be faced with the issue of putting bends in it, which can’t be done just with normal piping. You’ll need a special union fitting called an elbow in order to bend your piping around your plants.
These parts are designed to deal with high water pressure without breaking or leaking, which could be disastrous for your grow room and grow tent. Use a Waterproof Plastic Sheeting to protect your grow area.
These 25 mm Elbow Connectors are easy to attach and are threaded for extra safety. The above price is per unit.
How to attach 90° Elbow connectors:
- The first thing that you’ll need to do is unscrew one side of the fitting and remove the three parts from inside. Make sure to pay close attention to the order that they come out in so that you can put them back in in the same order.
- Place the part that you use removed on your piping.
- Now, you’ll need to place the pieces back in order; the plastic clamp goes on first.
- Next, place the plastic washer and lastly, the rubber grommet.
- The end of the pipe should only come out about 1 cm at the most from the grommet.
- Now, screw the end of the union back on. Don’t force it too much – if it doesn’t seem to be screwing, remove it and put it back on.
- This should be enough to make sure there are no leaks, but you can also use a faucet wrench to make sure that it’s fully secure.
You might also like
Same category products 90° Elbow Connector for 25mm
15/09/2025
Does what it should. Sturdy! Top notch.
Translated from German
Macht was es soll. Stabil! Top.
03/09/2025
For my first grow tent, I got a few of these. They look good, fine for ducting. Does anyone use these without clamps so no air escapes? It's my first time, I'm reading all the articles.
Translated from Spanish
Para mi primer armario, cogí unos cuantos de estos. Parecen buenos, bien para el conducto. ¿Alguien usa esto sin bridas para que no se escape nada de aire? Es mi primera vez, estoy leyendo todos los artículos.
23/08/2025
Ideal for redirecting airflow. Just what I was looking for!
Translated from Spanish
Ideal para reconducir el aire. ¡Justo lo que buscaba!
05/08/2025
Very good, easy to install for my intake! Spot on.
Translated from French
Très bon, facile à installer pour mon intraction! Nickel.
02/02/2024
The 25mm 90º elbow works great, very happy with the purchase!
Translated from Spanish
El codo de 90º de 25mm funciona genial, ¡muy contento con la compra!