CBD Shop
Smartshop
Personalized Attention +44 151 947 0713
SHIPPING TO ALL
9/10 Rating
SALE TO MINORS PROHIBITED
Open your shop
Stores
Iniciar sesión
0
Favorites
Pure Factory 5-bag kit (ice extraction)
€60.00
4.90/5
(10 Ratings)
These water hash extraction bags are of the highest quality, robust, and large. You get 5 bags of different micron sizes to extract various qualities.
6
loyalty points.
Your cart will total 6
loyalty points
that can be converted into a voucher of
1.20€
Description
With this complete set of Pure Factory 5-bag kit (ice extraction), you'll be able to make the most of the resin produced by your plants and separate it into different qualities. It's very easy to use, and to learn how to work with them, just follow these steps.
Learn how to use Pure Factory hash extraction bags
- Fill a bucket with the coldest water possible, preferably distilled or osmosis water. Add a lot of ice made from distilled or osmosis water to the bucket.
- Let the water temperature reach 2°C before adding the plant material and stir for approximately 10 minutes. Prepare another container with the same capacity as the previous one (20 L bucket) and start placing the meshes in ascending order: 38 microns, 70 microns, 90 microns, 185 microns, and finally the 220 microns.
- Now, empty the bucket with the water, ice, and marijuana into the bucket with the meshes, making sure they are placed in order and securely fastened. You can stir the mixture for about 10 or 20 minutes, being very careful not to damage the first mesh, or if you prefer, stir for a couple of minutes to let the resin settle and then start removing the meshes one by one, allowing all the water to drain well.
- In the first mesh extracted, you'll find all the used plant material; drain it well with your hands and discard all the content, as this part contains no hash. In the following meshes, you'll start to see the different qualities of hash accumulated at the bottom; drain each bag well and place the content of each (with the help of a spoon) on top of the pressing mesh to completely remove the water from the hash mass.
- Once drained, spread it well on a clean cardboard and place it in a dark, clean, and ventilated area. Stir it periodically to help it lose moisture better and prevent mold from appearing. Once it's more or less dry after several days, it's advisable to pass it through a sieve to achieve a better texture and allow it to dry perfectly after a few more days.
- Once it's perfectly dry, you can press it, work with a glass bottle and hot water, or you can consume it directly. To make the most of it, we recommend consuming it in a water-filtered BHO bong or with the Oiler Borosilicate Water Pipe BHO Secret Smoke.
Sizes and capacity of the Pure Factory 5-bag kit (ice extraction):
- 1 x 220 micron mesh
- 1 x 185 micron mesh
- 1 x 90 micron mesh
- 1 x 70 micron mesh
- 1 x 38 micron mesh
- 1 x 20 x 20 cm pressing mesh
- Maximum capacity of 19 liters in all bags.
You might also like
Same category products Pure Factory 5-bag kit (ice extraction)
Usually joint purchase
Pure Factory 5-bag kit (ice extraction)
€60.00€
