GB LIGHTING 720W LED SYSTEM, Find out more!

Personalized Attention +44 151 947 0713

SHIPPING TO ALL

9/10 Rating

SALE TO MINORS PROHIBITED

Open your shop

Stores

Iniciar sesión

Favorites

Our catalog

Marijuana Seeds CBD Shop Smartshop Nutrients and Fertilizers Indoor Lighting HeadShop Vape Shop

Special Offers Blog

SwitchGO Dr. Dabber vaporizer

€379.00 €421.11 10%

0.00/5 (0 Ratings)

The Dr. Dabber Switch GO Vaporizer is a portable e-rig for concentrates with a quartz insert, water filtration, and adjustable temperature. It reaches the chosen temperature in 5-20 seconds and allows you to customize each session through the Dr. Dabber app.

Add to favorites

37 loyalty points. Your cart will total 37 loyalty points that can be converted into a voucher of 7.40€

Data sheet

Description

Dr. Dabber Switch GO: Portable e-rig with advanced control

The Dr. Dabber Switch GO brings the Switch range experience into a much more compact format. This electronic vaporizer for concentrates combines a chamber with a quartz insert, water filtration, and extensive temperature control to adapt vapor production, flavor, and intensity for each session.

At just 15.2 cm (6 inches) tall and weighing approximately 363 g (12.8 oz), it's easy to transport without sacrificing a functional water chamber. This device is designed for both beginners looking for an easy-to-use e-rig and experienced users who want to precisely adjust their heating curves.

Uniform heating without replaceable atomizers

The Switch GO uses a resistance heating system that applies heat from the sides and bottom of the chamber. A temperature sensor helps maintain thermal behavior under control throughout the session.

Instead of relying on a conventional atomizer that needs periodic replacement, it uses a removable quartz insert. This material facilitates cleaning, preserves flavor well, and allows only the cup to be replaced when necessary.

Adjustable temperature between 121 and 343 °C

Its operating range spans from 250 to 650 °F, approximately equivalent to 121–343 °C (250–650 °F). This range allows for choosing moderate temperatures to prioritize aromatic nuances or higher levels for denser vapor.

The device includes five pre-configured profiles that can be selected directly using its buttons. When connected to the Dr. Dabber app, it's possible to more precisely adjust the temperature, session duration, and heating behavior.

Customizable thermal profiles via the app

The Dr. Dabber app allows you to create temperature curves and access its dynamic heating modes. This way, the temperature can remain stable, increase, decrease, or vary throughout the session.

From the app, you can also customize lighting, brightness, haptic feedback, automatic shutdown time, and other device settings. The illuminated water chamber also functions as a visual indicator, making it easy to know the vaporizer's status while in use.

Water filtration in a compact format

The glass accessory guides the vapor through water before inhalation, helping to cool and smooth it. The magnetic carb cap with joystick-type control allows you to direct airflow within the insert to utilize the concentrate more uniformly.

The Dr. Dabber Switch GO is 54% smaller than the Switch². It can be comfortably handled with one hand, although, as it includes a glass piece, it should be transported empty, protected, and in a secure position.

Battery life and USB-C charging

The battery provides up to 20 heating cycles per charge, although actual battery life may vary depending on the selected temperature and duration. A full charge takes approximately 45 to 60 minutes.

Its USB-C connection supports pass-through charging, so the device can be used while connected to a compatible power source. This feature reduces waiting times when the battery is low.

How to use the Dr. Dabber Switch GO Vaporizer

Remove the crown and carefully extract the glass piece.
Fill with water up to the indicated fill line and replace it.
Remove the carb cap and place a small amount of concentrate into the quartz insert.
Replace the cap and press and hold the GO button for two seconds to turn on the device.
Select the desired profile using the temperature buttons.
Press the GO button once to start heating.
Wait for the vibration and lighting to indicate that the session is ready.
Inhale gently while moving the joystick on the cap to direct airflow.

It is recommended to start with a small amount and a moderate temperature. This makes it easier to find the balance between flavor and vapor density without leaving too much residue in the insert.

Cleaning and maintenance

After each session, allow the device to cool down and remove any residue from the insert with a suitable swab. The quartz insert can be disassembled for deeper cleaning with isopropyl alcohol, provided it is completely cool.

The glass piece should also be emptied and cleaned periodically to prevent residue buildup. Do not submerge the electronic body or allow water or alcohol to enter it. Before reassembling the parts, ensure they are completely dry.

Dr. Dabber Switch GO Features

Technical Specifications of the Dr. Dabber Switch GO Vaporizer	Value
Device Type	E-rig or portable electronic vaporizer
Compatible Material	Concentrates
Heating System	Multi-directional resistance with temperature control
Insert	Removable quartz
Temperature Range	121–343 °C (250–650 °F) approximately
Heating Time	Between 5 and 20 seconds, depending on the setting
Battery Life	Up to 20 heating cycles per charge
Charging Time	Between 45 and 60 minutes
Connection	USB-C with pass-through charging
Height	Approximately 15.2 cm (6 inches)
Width	Approximately 8.4 cm (3.3 inches)
Weight	Approximately 363 g (12.8 oz)
App Control	Yes
Manufacturer's Warranty	1 year for battery, charger, and electrical components

What's included with the Dr. Dabber Switch GO?

Dr. Dabber Switch GO Vaporizer.
Quartz insert.
Glass accessory with water filtration.
Magnetic carb cap.
Concentrate tool.
USB-C charging cable.

Warning: This device is intended exclusively for adults and for use with legal concentrates. It is not compatible with dry herbs or e-liquids. Read the manufacturer's manual before use.

Frequently Asked Questions about the Dr. Dabber Switch GO

Does the Dr. Dabber Switch GO work with dry herbs?

No. The Switch GO is designed specifically for concentrates. It should not be used with dry herbs, liquid oils, or e-liquids.

What temperature can the Switch GO reach?

It allows temperature regulation between 250 and 650 °F, approximately equivalent to 121–343 °C. Moderate levels prioritize flavor, while high levels generate denser vapor.

Is it necessary to use the app to vaporize?

No. Its buttons allow you to turn on the device, select one of the available profiles, and start heating. The app is optional and adds advanced controls, thermal curves, and customizable lighting.

How many sessions does the battery offer?

The manufacturer indicates up to 20 heating cycles with a full charge. This number may decrease when using high temperatures or longer sessions.

Does the Dr. Dabber Switch GO use induction heating?

No. Unlike the Switch², the Switch GO uses resistance heating and conduction around the chamber. This technology heats the quartz insert without using a conventional replaceable atomizer.