Personalized Attention +44 151 947 0713
SHIPPING TO ALL
9/10 Rating
SALE TO MINORS PROHIBITED
Open your shop
Stores
Iniciar sesión
0
Favorites
GSE Humidity & Temperature Low Pressure Controller
€179.00
5/5
(6 Ratings)
This controller is top-shelf and extremely efficient – it’ll allow you to control both temperature and humidity and it’s extremely easy to use.
17
loyalty points.
Your cart will total 17
loyalty points
that can be converted into a voucher of
3.40€
Description
GSE Humidity & Temperature Low Pressure Controller
This controller is top-shelf and extremely efficient – it’ll allow you to control both temperature and humidity and it’s extremely easy to use.
GSE controller will efficiently regulate grow parameters
This controller will allow you to control both temperature and humidity with two extractors, allowing you to adjust the minimal speed of the extractor fans, such as the RVK Extractor Fan, to ensure that they work efficiently.
It regulates temperature, humidity, low speeds so that the extractors don’t make much noise, as well as negative pressure so that you’re not intracting or extracting more air that you should, avoiding any smells getting out – all of this in a small device that has just 4 buttons.
GSE Controller is Reliable and Water Resistant
The controller has three lights so you can see what’s working and what’s not. You can install it in your grow without worrying about any safety issues as it’s quite well-made and safe – it’s water resistant and has a low-tensions sensor.
Technical information & size:
- Box: 130 x 80 x 70 mm
- Controller: 160 x 100 x 90 mm
- Designed for: 2x 200 w
- Volts: 230 v / 50HZ
- Digital Sensor: 5 V temperatures from -55ºC to +125ºC
- 0.5ºC precision from -10ºC to +85ºC
- Humidity precision +/- 4.5% relative humidity
- Type of protection: IP54
You might also like
Same category products GSE Humidity & Temperature Low Pressure Controller
12/08/2023
Would it be as easy as plugging in the intake and exhaust fans, setting temperature and humidity, and that's it?
Translated from Spanish
Sería tan fácil como enchufar extractor e intractor, seleccionar temperatura y humedad y ya está?
18/01/2023
My question is, when the grow is (at night) and I want it to renew the air every x time.. if it's set to x temperature and at night it's obviously lower... how can I get it to exchange the air every x time????
Translated from Spanish
Mi pregunta es , cuando el cultivo esta (de noche ) y quiero que cada x tiempo renueve el aire .. si esta configurado a x temperatura y por la noche esta mas baja obvio ... como puedo hacer para q cambie el aire cada x tiempo ????
15/10/2021
can it be used with any extractor fan model? and if not, which models does it work well with and which not?
Translated from Spanish
se puede utilizar con cualquier modelo de extractor? y si no es asi, con que modelos funciona bien y con cuales no?
02/05/2021
can it be used with any extractor model? and if not, which models does it work well with and which ones not?
Translated from Spanish
se puede utilizar con cualquier modelo de extractor? y si no es asi, con que modelos funciona bien y con cuales no?
10/04/2020
Can it work with an outlet extractor and without an intake extractor? But with passive intake? Regards.
Translated from Spanish
Se puede poner a funcionar con la extracción de salida y sin tener extractor de Métida? Pero si entrada natural? Saludos.
05/04/2020
Do the extraction and intake need to move the same cubic meters per hour? Or does the intake have to move fewer cubic meters? By the way, is VPD taken into account with this controller? Does it regulate it? Thanks, greetings
Translated from Spanish
La extracción y la intraccion tienen que mover los mismos metros cúbicos horas? O ¿la intraccion tiene que mover menos metros cúbicos?.
Por cierto se tienes en cuenta el DPV con este controlador? ¿Lo regula? Gracias un saludo