Personalized Attention +44 151 947 0713
SHIPPING TO ALL
9/10 Rating
SALE TO MINORS PROHIBITED
Open your shop
Stores
Iniciar sesión
0
Favorites
Cli-Mate Mini Controller-HUMI 7A 4x600w
€248.00
€310.00
20%
5/5
(3 Ratings)
Mini-Grower/Mini-Controller. HUMI by Cli-Mate is a light, temperature and humidity controller. This device is in charge of keeping the micro-climate in your indoor grow running smoothly.
24
loyalty points.
Your cart will total 24
loyalty points
that can be converted into a voucher of
4.80€
Description
Automatically Control your Grow's Parameters with this Mini Controller-HUMI 7A Cli-mate 4x600W
Control your grow’s parameters with the Cli-Mate Mini-Grower/Mini-Controller HUMI, now including humidity; up until now we only had the model that controls temperature, but now you can get your hands on this beauty that controls humidity as well as other devices in your grow.
- You’ll be able to time 4 600w lights with just one timer that’s built in to the controller itself. This timer won’t give you any electrical issues nor will it mess with your lights – your plants will be completely safe.
- You’ll be able to connect an extractor and intractor in order to control both temperature and humidity. Depending on how hot/cold the air that’s being intracted is, as well as its level of humidity, the controller will try and find the best setting to give your grow the best parameters possible. You can set the minimum and maximum speed so that your RVK Extractor Fan is never off, avoiding any telling odors from getting out and possibly ruining any discretion your grow might have had.
- It also has a hysteresis setting, allowing you to set the max and minimum degrees you want the temperature to fluctuate between. If you want the temperature at 25º and you set the hysteresis to 2º, it’ll go up to 27º and down to 23º maximum.
- You can also plug a heater into this device, and if the temperature gets too low at night it’ll turn on and maintain a stable temperature.
Obtain precise measurements thanks to its great quality materials and its probe
In order for all measurements taken to be accurate, you’ll need to place the sensor near the tips of the plants. If there are any issues such as a short circuiting of the extractors, a fuse will go in the device, protecting your grow – if the issue happens with the lights, the thermal shielding inside the device will also ensure your grow is safe.
If you’re looking to have total control over your grow, you’ll definitely need one of these Cli-Mate temperature, humidity and light controllers.
You might also like
Same category products Cli-Mate Mini Controller-HUMI 7A 4x600w
24/12/2021
Is your HUMI 7A Cli-Mate climate controller suitable for French plugs?
Translated from French
Votre controleur de climat HUMI 7A cli-Mate est -il adapté pour les prises française
15/12/2020
Works great, saves trips to the indoor setup!!! An absolute must for me
Translated from Spanish
Funciona genial, ahorra viajes al indoor!!! Para mi imprescindible
06/12/2020
Disappointed me a bit, it's not what I expected. I expected it to control the heater at all times, not just by adjusting the extractors.
Translated from Spanish
Mea decepcionado un poco no es lo.que yo esperaba.
Yo esperaba que actuará sobre el calefactor en todo momento no sólo regulando los extractores.